AUX-In
Created by Fredrik Andersen - Friday, februar 27 2015, 14:36:01
This retrofit fits the following models:
Audi A3 8P Hatchback (2003 - 2013)
Audi A3 8P Sportback (2004 - 2013)
Introduction
To bigin with I actually installed a AUX cable from my RNS-E running to the small container to the left of the steering wheel. I however usually use SD Cards for playing music so the AUX is only used when I have guests in the car. Therefore it was an issue having the AUX in the drivers side and now that I was planning on changing to the US Center Console it did make a lot of sense to move the AUX at the same time.Time
1 hourInstallation & Guide
The installation was done by Cartrends.dk (Denmark)I found this guide which I think most people will be able to follow.
http://www.audizine.com/forum/showthread.php/445009-AUX-RNS-E-%28pics%29
INFO: The guide is of course a bit different compared to purchasing the finished AUX cable as I did
Coding
1. 37-Navigation2. Coding - 07
3. xxxxx?x
Increase the value with 4
This specific coding works with RNS-E
You can however find the coding for other radios together with other coding options for RNS-E/ICE here.
Usage
1) Connect a device to the AUX plug.2) Press the "Source" button on your RNS-E.
3) Choose "AUX".
4) Start playing music from the device connected to AUX.
Part numbers + Price
| AUX-in Cable for RNS-E | 39 € | Kufatec |
If you prefer to purchase the AUX parts yourself
| AUX Housing | 8J0 035 475 |
| AUX plug for RNS-E | 1J0 972 977 G |
| 4 pin plug for AUX housing | 8K0 973 754 |
| Cable for AUX plug | 000 979 009 EA |